| Customization: | Available |
|---|---|
| Operating Principle: | Mixed Type |
| Type: | Hand-held Type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Extremely thin and light industrial terminal.
The ultra-thin body, the net weight is only 249g, and the industrial three-proof reaches the IP65 level. Using a 5.5-inch full-fit high-definition display, the screen brightness of 450 lumens in outdoor sunlight is 1.8 times higher than that of ordinary mobile phones. In the field of vision of the high-definition large screen, feel the impact of high brightness, and the vision is more delicate and clear.
2.[High precision] Sub-meter positioning accuracy
High precision is the soul of Beidou mobile terminal. The use of built-in high-precision boards and large-size Beidou antennas improves the positioning accuracy of the Android TM three-proof terminal to sub-meter level, consolidating its leading position in the high-precision industry. With the addition of external source differential technology, the CORS differential accuracy is less than 1 meter, so there is no need to worry about the lack of high accuracy of the Android TM terminal.
3.[Large capacity]]Super large lithium battery with strong battery life
What makes him charming is not only the elegant appearance of being bigger and thinner, but also the powerful performance that is closely related to the experience inside, which is inseparable from the strong power. Equipped with 4300mAh ultra-large-capacity batteries, using high-voltage lithium-ion batteries, the battery size can be thinner and smaller, and finally achieve both ultra-thin and large power, and the continuous flow of wonderful battery life.
4.[Super expansion]All-round expansion of data acquisition terminal
In the era of Internet +, it is the first to integrate a variety of sensors into one, and the body reserves a large-scale expansion space, which can flexibly integrate one/two-dimensional barcode, infrared, NFC, and even integrate temperature and humidity, PM2.5 sensors, etc. Applications you want to extend, integrating the future you foresee.
| Chc LT40 Handheld GPS | |
| System Configuration | |
| Operating system | Android 5.1 |
| CPU | Octa-core 1.5GHz |
| RAM | 3GB |
| ROM | 32GB |
| Expand | Support TF card expansion, up to 32G |
| GPS performance | |
| Built-in high-precision positioning module, support GPS, Beidou, GLONASS | |
| positioning accuracy | Single point positioning 2-5 meters (CEP) |
| SBAS differential | SBAS 1-2 meters (CEP) |
| CORS differential | 1 meter (CEP) |
| Cold start | 27s |
| Hot Start | 1s |
| Channels | 72 |
| Display | |
| size | 5.5-inch high-definition capacitive touch screen |
| Resolution | 1280*720 |
| brightness | 450cd/m2 |
| touch screen | Capacitive touch, 5 points, support 1.0mm thickness glove operation |
| Camera | |
| front | 2 million |
| rear | 800w |
| flash | support |
| Physical Properties | |
| grade | IP65 |
| Anti-drop | When not working, it can resist 1.5 meters natural fall to the cement floor without damage |
| humidity | 5%RH - 95%RH (non-condensing) |
| size | 164.8mm*86mm*16.7mm |
| weight | 249g (including battery) |
| Operating temperature | -30ºC ~ +60ºC |
| Storage temperature | -40ºC ~ +70ºC |
| data communication | |
| WiFi | 802.11a/b/g/n |
| cellular | TD-LTE,TD-SCDMA,EDGE,GSM |
| Bluetooth | Bluetooth V4.0 |
| USB interface | Micro USB, OTG (support hot-plug U disk) |
| Barcode Module | 1D/2D barcode scanning (optional) |
| Power Supply | |
| battery capacity | 4300mAh |
| Operating Voltage | 3.8V |
| work time | 10 hours |
| Charging time | 4 hours |
| Physical properties | |
| Gravity sensor | support |
| light sensing | support |
| distance sensing | support |
| Electronic compass | support |
| Gyro | support |
| NFC | Optional |
| Satellite status and working environment will affect the positioning accuracy. | |
| * The technical parameters and configuration of our products are subject to change without prior notice | |
1.All products are inspected before shipment, if you are not satisfactory with the purchase, you can exchange the items in one week, and you must contact us within 24 hour of receipt of the products.
2.The shipping charges are not refundable and the customer should be responsible for all the charges of return and reshipping.
3.For our majority products (Auto level, Theodolite, Total Station) we are offing 1 year warranty;
4.For small issues like missing or damaged part, key board, please send us the photos, we will send the required part and related instructions to you for free;
5. For big issues in one year warranty like EDX board, main board issue. We could only ask you to send the instrument back to us. Normally we will have it fixed in 10 working days and send back to you. You and we shall take care of the corresponding shipping cost on each side. For big issues out of one year warranty, the customer should be responsible for all the cost.
){kind=link}