Basic Info.
Vertical Lines
5mm+0.5ppm
Horizontal Line
2.5mm+0.5ppm
Product Description
ComNav T10 GNSS RTK
Product Description
Multi in one antenna design, empowering the host
Adopting a combination of low profile, lightweight, miniaturized, and high-precision measurement antennas with full network connectivity.
The innovative use of air medium+coupled feeding+broadband phase balance technology greatly reduces the antenna volume without affecting performance.
New K8 platform
The all-new Beidou high-precision SOC chip adopts a 40nm low-power process, supports multi-system joint positioning, strengthens signal reception and transmission, and significantly improves positioning accuracy and reliability in complex environments
Multiple self-developed technologies
1. Quantum RTK second fixing technology
2. FullStar full constellation technology
3. RTK-KEEP Chain Breakage Maintenance Technology
4. PDP single point smoothing technology
5. HighLock signal tracking technology
6. LAI low-power anti-interference technology with multiple technologies, only for a better user experience
Seven stars and thirty frequencies, signal worry free
Fully supports Beidou-3 satellite signals, with up to 1590 available satellite 50+parallel channels
Full constellation tracking, fearless of occlusion, and excellent performance in complex environments
Third generation inertial navigation, efficient and convenient
60 ° tilt measurement to accelerate measurement
Anti magnetic interference, precision first
5s initialization, measurement without looking at bubbles
Product Parameters
| ComNav T10 GNSS Technical Parameter |
| GNSS configuration | GPS: L1C/A,L2P,L1C,L2C,L5 |
| BDS-2: B1I,B2I,B3I |
| BDS-3: B1C,B2a,B2b,B2b-ppp |
| GLONASS: G1C,G1P,G2C,G2P,G3 |
| Galileo : E1,E5b,E5a,E5AltBoc,E6c |
| QZSS: L1C/A,L2C,L5,L1C,L1s,L5s,L6 |
| NAVIC: L5 |
| SBAS: L1C/A,L5C |
| Number of channels | Number of parallel channels: 1590 |
| Accuracy and reliability | Signal recapture: ≤ 1s |
| First positioning time: Cold start: ≤ 30s |
| Hot start: ≤ 10s |
| Pseudorange accuracy: Pr ≤ 10cm, Cp ≤ 0.005c(Note: Pseudorange accuracy: L2P (GPS) B1 (BDS)/≤ 0.13m) |
| PVT accuracy: H ≤ 1.5m, V ≤ 3m (1 σ) |
| RTD accuracy: H ≤ 0.3m, V ≤ 0.6m (1 σ) |
| RTK initialization time:<5s (baseline length D ≤ 10km) |
Dynamic difference accuracy: H: ± (8+1) × 10-6 × D)mm
V: ±(15+1 × 10-6 × D)mm
D is the baseline length, in millimeters (mm) |
| Data update rate: Measurement&positioning 1Hz, 2Hz, 5Hz, 10Hz |
| Data integrity rate: ≥ 99% |
| Output data format | NMEA-0183: GPGGA,GPGSV,GPGSA,GPRMC, |
| GPVTG,GPZDA |
| Sino binary format: c nb (Sino custom) |
| RTCM2.x: RTCM1B,RTCM3B,RTCM9B, |
| RTCM1819B,RTCM59B |
| RTCM3.0: 1004,1005,1006,1007,1008,1011,1104,1033 |
| RTCM3.2: MSM4,MSM5 |
| Electrical characteristics of power supply | Power supply voltage: 5V/9V ± 5% VDC |
| Power consumption: 1.4W |
| Overvoltage protection voltage: Within 30V, VBUS voltage exceeds 9.99V protection |
| Interface electrical characteristics | Serial port: supports serial communication |
| USB: TYPE-C interface |
| SIM card: eSIM card |
| Centering rod interface: standard English 5/8 inch UNC internal thread |
| Data transmission interface: SMA interface |
| Mobile network | Network formats: LTE-FDD, LTE-TDD, WCDMA, TD-SCDMA, CDMA, GSM |
| Data protocols: LTE-FDD, LTE-TDD, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA, TD-SCDMA, CDMA, EDGE, GPRS |
| Antenna: Three in one antenna |
| Basic functional parameters | Bluetooth: BT5.0 dual mode Bluetooth with built-in antenna |
| Tilt measurement: ≤ 2cm (tilt angle ≤ 30 °) (1 σ) |
| Integrated transceiver radio station: receiving sensitivity can reach -115dBm, transmission power is adjustable at 0.5W, 1W, and 2W, air baud rates are optional at 9600 and 19200, and radio station step frequency is 12.5KHz |
| Internal storage: 8G built-in storage |
| Charging function: Battery charging time<5h |
| RTC: Supports RTC functionality |
| Key: Power button |
| Environmental | Working temperature: -30 ºC -+65 ºC |
| Storage temperature: -40 ºC -+85 ºC |
| Working humidity: 100% non condensing |
| Waterproof and dustproof level: IP67 |
| Vibration/impact: resistant to 2m cement drop |
| Physical Property | Shell material: magnesium aluminum alloy shell |
| Working time: ≥ 30h (mobile network mode) |
| Size: Ф 130*65.5mm |
| Weight: 790g |
| R50 controller | Operating system: Android12 |
| CPU: Qualcomm Snapdragon |
| Storage: 3GB+32GB |
| Network: Equipped with eSIM card, 4G full network connectivity |
| Battery: 7000mAh Long Range |
| Touch screen: 5.5 inch high brightness color screen |
| Keyboard: 9-grid numeric keyboard |
| Resolution: 720 * 1280 resolution, visible to sunlight |
| Waterproof and dustproof level: IP67 |
Company Profile
Nanjing Hanzhong mapping equipment Co., Ltd. is a company to provide professional surveying and mapping services for the country mapping units. The company set sales, repair, and services, it is in specialized in sales of surveying instruments in domestic and abroad.
Mainly sales of total station, auto/digital level, auto/electronic theodolite, GPS, GNSS RTK, receiver, laser distance meter, handheld GIS,UAV. etc. And some accessories for these surveying instruments. We can provide trimble, spectra, sanding, hi-target, south, kolida, chc, stone, unistrong, foif and other well-known brands at home and abroad. Our Company′s employees graduated from engineering, surveying, and mapping professional institutions of higher learning, they have professional knowledge, so we are the high-quality sales and service team to provide you with excellent quality instrument service, customized, comprehensive, practical, and efficient measuring solutions .At the same time also provide intimate after-sales service.
Our aim: Integrity, professionalism, service
Our goal: To do the best mapping equipment supply service providers
FAQ
Service
1.Any inquiries will be replied within 12 hours.
2.All our products have one year warranty, And we sure the products will be free from maintenance within warranty period.
3.All products will have been strictly quality checked in factory before sending out.
Payment
We accept payment by TT,Paypal, West union.
If you'd like other payment method, Pls let us know before the order
Delivery / shippment :
1.Usually, we will send out the products within 3-5 working days after the payment confirmed
2.Before shipment, pls supply the following information to us :
Contact person or company name,Detail address,Telephone No,Zipcode
3.The buyer are responsible for the tax and/or duty charged by their country.
Return and warranty:
1.All products are inspected before shipment, if you are not satisfactory with the purchase,you can exchange the items in one week,and you must contact us within 24 hour of receipt of the products.
2.The shipping charges are not refundable and the customer should be responsible for all the charges of return and reshipping.
3.For our majority products (Auto level, Theodolite, Total Station) we are offing 1 year warranty;
4.For small issues like missing or damaged part, key board, please send us the photos, we will send the required part and related instructions to you for free;
5. For big issues in one year warranty like EDX board, main board issue. We could only ask you to send the instrument back to us. Normally we will have it fixed in 10 working days and send back to you. You and we shall take care of the corresponding shipping cost on each side. For big issues out of one year warranty, the customer should be responsible for all the cost.
Contact Us:
https://surveyinginstrument.en.made-in-china.com/contact-info.html
Address:
Room-802, Building B, No. 6 Xingzhi Road, Qixia District, Nanjing, Jiangsu, China
Business Type:
Trading Company
Business Range:
Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service, Tools & Hardware, Transportation
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, IATF16949, ISO 14064, SEDEX, ISO 10012
Company Introduction:
Nanjing Hanzhong Surveying Instruments Co., Ltd. is a company to provide professional surveying and mapping services for the country mapping units. The company set sales, repair and service, company is in specialized in sales of surveying instruments in demestic and abroad.
Mainly sales of total station, auto/digital level, auto/electronic theodolite, GPS, GNSS RTK, GPS, receiver, laser distance meter, handheld GIS. UAV. etc. And and some accessories for these surveying instruments. We can supply with trimble, leica spectra, sanding, hi-target, south, kolida, sanding, chc, stonex, unistrong, foif brand. etc.
The Company′s employees graduated from engineering, surveying and mapping professional institutions of higher learning, professional knowledge, is a high-quality sales and service team to provide you with excellent quality instrument service, customized, comprehensive, practical and efficient measuring solutions at the same time, also for users you track, intimate after-sales service.
Our aim: Integrity, professional, service
Our goal: To do the best mapping equipment supply service providers
){kind=link}