Basic Info.
Product Description
Trimble R10 GPS with Tsc3 Controller
Product Description
1.Trimble R10 gnss receiver
2.A cutting edge Trimble HD-GNSS processing engine
3.Trimble SurePointaa for precise position capt
Trimble R10 gnss receiver
Features
- A cutting edge Trimble HD-GNSS processing engine
- Trimble SurePoint™ for precise position capture, even with pole tilt off by 15° from plumb, and with 100% data traceability
- Trimble 360 for advanced satellite tracking of existing and planned GNSS constellations and augmentation systems - 440 GNSS channels
- Trimble CenterPoint™ RTX™ for RTK level precision anywhere without the need for base station or VRS network
- Trimble xFill™ for RTK coverage even during connection outages
- Trimble Access field software and Business Center office software and technologies
- Pair with Trimble TSC3 or rugged Trimble Tablet controller for the most powerful solution on the market
Product Parameters
Measurements
• Measuring points sooner, faster and in harsh environments with Trimble HD-GNSS technology
• Increased measurement traceability with Trimble SurePoint electronic plumb detection
• Reduced downtime due to loss of radio signal with xFill technology
• Advanced Trimble Maxwell 6 Custom Survey GNSS chips with 440 channels
• Future-proof your investment with Trimble 360 GNSS tracking
• Satellite signals tracked simultaneously:
-- GPS: L1C/A, L1C, L2C, L2E, L5
-- GLONASS: L1C/A, L1P, L2C/A, L2P, L3
-- SBAS: L1C/A, L5 (For SBAS satellites that support L5)
-- Galileo: GIOVE-A and GIOVE-B, E1, E5a, E5B
-- COMPASS: B1, B2, B3
• OmniSTAR HP, XP, G2, VBS positioning
• QZSS, WAAS, MSAS, EGNOS, GAGAN
• Positioning Rates: 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz
Positioning performance
Code differential GNSS positioning
Horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 m + 1 ppm RMS
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.50 m + 1 ppm RMS
SBAS differential positioning accuracy2. . . . . . . . . . . . . . . . . . .typically <5 m 3DRMS
Static GNSS surveying
High-Precision Static
Horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 mm + 0.1 ppm RMS
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 mm + 0.4 ppm RMS
Static and Fast Static
Horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 mm + 0.5 ppm RMS
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mm + 0.5 ppm RMS
Real Time Kinematic surveying
Single Baseline <30 km
Horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 mm + 1 ppm RMS
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 mm + 1 ppm RMS
Network RTK
Horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 mm + 0.5 ppm RMS
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 mm + 0.5 ppm RMS
RTK start-up time for specified precisions . . . . . . . . . . . . . . . . . . . . . 2 to 8 seconds
Trimble CenterPoint RTX
Horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 cm
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 cm
RTX convergence time for specified precisions12. . . . . . . . . . . .30 minutes or less
RTX QuickStart convergence time for specified precisions12. . . . .5 minutes or less
Trimble xFill5
Horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RTK6 + 10 mm/minute RMS
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RTK6 + 20 mm/minute RMS
Hardware
Physical
Dimensions (W×H). . . . . . . . . . . . . . . . . . . . . . . .11.9 cm x 13.6 cm (4.6 in x 5.4 in)
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . .1.12 kg (2.49 lb) with internal battery,
internal radio with UHF antenna,
3.57 kg (7.86 lb) items above plus range pole, controller & bracket
Temperature
Operating. . . . . . . . . . . . . . . . . . . . . . . . . .-40 °C to +65 °C (-40 °F to +149 °F)
Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . .-40 °C to +75 °C (-40 °F to +167 °F)
Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100%, condensing
Ingress Protection. . . . . . . . . . . . . . . . . . . IP67 dustproof, protected from temporary
immersion to depth of 1 m (3.28 ft)
Shock and vibration. . . . . . . . . . . . . . . . . . . . . . . . . Tested and meets the following environmental standards:
Shock. . . . . . . . . . . . . . . . . . .Non-operating: Designed to survive a 2 m (6.6 ft) pole
drop onto concrete. Operating: to 40 G, 10 msec, sawtooth
Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-STD-810F, FIG.514.5C-1
Electrical
• Power 11 to 24 V DC external power input with over-voltage protection on Port 1 and Port 2 (7-pin Lemo)
• Rechargeable, removable 7.4 V, 3.7 Ah Lithium-ion smart battery with LED status indicators.
• Power consumption is 5.1 W in RTK rover mode with internal radio.
• Operating times on internal battery:
-- 450 MHz receive only option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.5 hours
-- 450 MHz receive/transmit option (0.5 W) . . . . . . . . . . . . . . . . . . . . . . 4.5 hours
-- 450 MHz receive/transmit option (2.0 W) . . . . . . . . . . . . . . . . . . . . . . 3.7 hours
-- Cellular receive option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.0 hours
Communications and Data Storage
• Serial: 3-wire serial (7-pin Lemo)
• USB: supports data download and high speed communications
• Radio Modem: fully Integrated, sealed 450 MHz wide band receiver/transmitter with frequency range of 410 MHz to 470 MHz:
-- Transmit power: 2 W
-- Range: 3-5 km typical / 10 km optimal
• Cellular: integrated, 3.5 G modem, HSDPA 7.2 Mbps (download), GPRS multi-slot class 12, EDGE multi-slot class 12, UMTS/HSDPA (WCDMA/FDD) 850/1900/2100MHz, Quad-band EGSM 850/900/1800/1900 MHz, GSM CSD, 3GPP LTE
• Bluetooth: fully integrated, fully sealed 2.4 GHz communications port (Bluetooth)
• WiFi: 802.11 b,g, access point and client mode, WEP64/WEP128 encryption
• External communication devices for corrections supported on - Serial, USB, Ethernet, and Bluetooth ports
• Data storage: 4 GB internal memory; over three years of raw observables (approx. 1.4 MB /day), based on recording every 15 seconds from an average of 14 satellites
• CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1 input and output
• 24 NMEA outputs, GSOF, RT17 and RT27 outputs
WebUI
• Offers simple configuration, operation, status, and data transfer
• Accessible via WiFi , Serial, USB, and Bluetooth
Supported Trimble Controllers
• Trimble TSC3, Trimble CU, Trimble Tablet Rugged PC
Certifications
FCC Part 15 (Class B device), 22, 24; R&TTE CE Mark; C-Tick, A-Tick; PTCRB; WFA
Detailed Photos
Company Profile
Nanjing Hanzhong mapping equipment Co., Ltd. is a company to provide professional surveying and mapping services for the country mapping units. The company set sales, repair, and services, it is in specialized in sales of surveying instruments in domestic and abroad.Mainly sales of total station, auto/digital level, auto/electronic theodolite, GPS, GNSS RTK, receiver, laser distance meter, handheld GIS,UAV. etc. And some accessories for these surveying instruments. We can supply with trimble, leica,spectra , sanding, hi-target, south, kolida, chc, stonex, unistrong, foif brands. etc. Our Company′s employees graduated from engineering, surveying, and mapping professional institutions of higher learning, they have professional knowledge, so we are the high-quality sales and service team to provide you with excellent quality instrument service, customized, comprehensive, practical, and efficient measuring solutions .At the same time also provide intimate after-sales service.Our aim: Integrity, professionalism, serviceOur goal: To do the best mapping equipment supply service providers
FAQ
Service
1.Any inquiries will be replied within 12 hours.2.All our products have one year warranty, And we sure the products will be free from maintenance within warranty period.3.All products will have been strictly quality checked in factory before sending outPayment
We accept payment by TT,Paypal, West union.If you'd like other payment method, Pls let us know before the orderDelivery / shippment :
1.Usually, we will send out the products within 3-5 working days after the payment confirmed2.Before shipment, pls supply the following information to us :Contact person or company name,Detail address,Telephone No,Zipcode3.The buyer are responsible for the tax and/or duty charged by their country.
Return and warranty:
1.All products are inspected before shipment, if you are not satisfactory with the purchase, you can exchange the items in one week, and you must contact us within 24 hour of receipt of the products.
2.The shipping charges are not refundable and the customer should be responsible for all the charges of return and reshipping.
3.For our majority products (Auto level, Theodolite, Total Station) we are offing 1 year warranty;
4.For small issues like missing or damaged part, key board, please send us the photos, we will send the required part and related instructions to you for free;
5. For big issues in one year warranty like EDX board, main board issue. We could only ask you to send the instrument back to us. Normally we will have it fixed in 10 working days and send back to you. You and we shall take care of the corresponding shipping cost on each side. For big issues out of one year warranty, the customer should be responsible for all the cost.
Contact Us:
https://surveyinginstrument.en.made-in-china.com/contact-info.html
Address:
Room-802, Building B, No. 6 Xingzhi Road, Qixia District, Nanjing, Jiangsu, China
Business Type:
Trading Company
Business Range:
Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service, Tools & Hardware, Transportation
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, IATF16949, ISO 14064, SEDEX, ISO 10012
Company Introduction:
Nanjing Hanzhong Surveying Instruments Co., Ltd. is a company to provide professional surveying and mapping services for the country mapping units. The company set sales, repair and service, company is in specialized in sales of surveying instruments in demestic and abroad.
Mainly sales of total station, auto/digital level, auto/electronic theodolite, GPS, GNSS RTK, GPS, receiver, laser distance meter, handheld GIS. UAV. etc. And and some accessories for these surveying instruments. We can supply with trimble, leica spectra, sanding, hi-target, south, kolida, sanding, chc, stonex, unistrong, foif brand. etc.
The Company′s employees graduated from engineering, surveying and mapping professional institutions of higher learning, professional knowledge, is a high-quality sales and service team to provide you with excellent quality instrument service, customized, comprehensive, practical and efficient measuring solutions at the same time, also for users you track, intimate after-sales service.
Our aim: Integrity, professional, service
Our goal: To do the best mapping equipment supply service providers