| Customization: | Available |
|---|---|
| Active Frequencies: | 8 |
| Sonde Frequencies: | 4 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The new RD7200 is a no compromise all-industry locator, designed for accurate and effective every day use
RD7200 locators and transmitters use transflective low power LCD technology that uses ambient light to improve screen readability in direct sun light and extend battery life.
Radiodetection's TruDepth displays precise depth and current measurements, only when the RD7200 is correctly oriented above the target. Measurement consistency gives high confidence that the correct line is being followed.
The RD7200 waterproof speaker housing has been tuned to provide optimum resonance for your choice of high or low frequency tones.
5 power output audio levels and vibration alerts, assist technicians working in challenging situations.
Accurate and simple to use, the RD7200 comes with eight active and three passive frequencies that cover the majority of site locating tasks. A rugged, IP65 rated casing along with a high contrast screen make it suitable for use in all weather conditions.
In complex power environments, with multiple signals from high voltage equipment and cables, Radiodetection's Dynamic Overload Protection reduces the effect of interference and Power Filters can be used to trace a single target line amongst multiple cables.
A wide choice of active frequencies allow conductive pipes to be traced for long distances.
Where sondes or cameras are used to survey pipes made from a variety of materials (including cast iron, clay, fiber, concrete and brick) the four RD7200 sonde frequencies are ideal for quickly locating and tracing their position.
Pipes with Cathodic Protection System can be followed using the CPS passive mode. CPS compass mode ensures alignment with the target pipeline.
TheRD7200 features higher frequencies to locate high impedance lines and sonde frequencies for duct and conduit tracing. Higher frequencies can also be used to trace sheathed domestic cables without grounding connections.
Cable sheath faults can be located to within 4" (10cm) using 8kHz Fault Find mode with a Radiodetection A-Frame.
Locators must be kept perpendicular to the ground for best accuracy. RD7200 locators have a built-in gyroscopic measurement system which alerts the user of excessive swing, driving correct usage.
Visual and audio warnings of shallow cables reduces the risk of accidents.
The RD7200 locator handle vibrates when alerts activate, leaving the operator to concentrate on the job at hand.
| RD8200 locators | RD7200 |
| Active Frequencies | 8 |
| Sonde Frequencies | 4 |
| Passive Modes | 3 |
| Power Filters | √ |
| Compass in active modes | √ |
| Survey Measurements | √ |
| CALSafe™ | θ |
| 4 kHz | 4k+CD |
| Current Direction | √ |
| Fault Find | √ |
| Depth in Power | √ |
| Passive Avoidance | √ |
| iLOC | √ |
| Dual Bluetooth connectivity | √ |
| Lithium-Ion Battery | O |
| Transmitters | Tx-5 | Tx-10 | Tx-10 B |
| Max. Output Power | 5W | 10W | 10W |
| Active Frequencies | 16 | 16 | 36 |
| Induction frequencies | 8 | 8 | 8 |
| Current Direction Frequencies | 6 | 14 | |
| iLOC remote control | √ | ||
| Fault Find | √ | √ | √ |
| Induction field strength | 0.85 | 1 | 1 |
| Eco Mode | θ | θ | θ |
| Lithium-Ion Battery | O | O | O |
1.All products are inspected before shipment, if you are not satisfactory with the purchase, you can exchange the items in one week, and you must contact us within 24 hour of receipt of the products.
2.The shipping charges are not refundable and the customer should be responsible for all the charges of return and reshipping.
3.For our majority products (Auto level, Theodolite, Total Station) we are offing 1 year warranty;
4.For small issues like missing or damaged part, key board, please send us the photos, we will send the required part and related instructions to you for free;
5. For big issues in one year warranty like EDX board, main board issue. We could only ask you to send the instrument back to us. Normally we will have it fixed in 10 working days and send back to you. You and we shall take care of the corresponding shipping cost on each side. For big issues out of one year warranty, the customer should be responsible for all the cost.
){kind=link}